200W 0-10V Constant Voltage Dimmable LED Driver

Specifications

• working mode : constant voltage type
• I/P: 100-265vAC/ 170-375vAC /47-63Hz
• Ambient temp.:-20 degree~40 degree full load
•  Efficiency> 90%
• PFC > 0.93
•  overload,over heat, over voltage, short circuit protection
• We give 3 years warranty(We promise to replace new ones to you if there is any defective happen during the warranty period)

Features:

• High efficiency,save energy ,protected environment.
• High stability and low ripple, increase light efficiency and decrease light attenuation.
• Meet to safety standard and EMC 
• Assure LED stability long lift and light efficiency by constant voltage.
• Integrity protection,over loading, over voltage ,over current.
• 8Hrs and 100% full load burn-in test.

Environment :

• Working Temperature : -25 ~ +50°C
• Working Humidity : 20 ~ 90% RH non-condensing
• Storage Temp. , Humidity : -40 ~ +80°C , 10 ~ 95% RH
• TEMP. Coefficient : ±0.03%/°C (0 ~ 50°C)
• Vibration : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety :

• Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved
• Withstand Voltage : I/P-O/P: 3000KVAC
• Isolation Resistance : I/P-O/P:100M Ohms/500VDC